Sloping Style Stove Cap With Strap Strap And Trim

  
Please read the full description before ordering. This is an angled style hood with strapping. These hoods are made with a 3/4 cabinet-quality plywood and maple veneer.

We offer some customizable options; most of them can be found under their own lists. We can do things like that.

Height reduction of 1 - 6. Fireplace extensions to 6, 12, 24, 36 & 48. Classic lining, flat and block. Ring and trim made of brass or stainless steel. Personalized paint correspondence (personalized invoice only - please send us a message). If you are interested in any of these options, please buy its list with the hood you want. You can also send us a message with your requests; we would be happy to help you. We also offer paint / dye samples and pictures of our hoods in different colors on request. We offer some ventilation brands that can be included in an order on request, for an additional fee. If you plan to use your own ventilation, it is recommended to provide us with the model number of your device. We are not responsible for your vent that is not suitable, unless we have confirmed it for you. It doesn't come with the crown molding.

Our matte black is not 100% matte, it has a 5% shine. Our hoods cannot be cut by more than 6. Anything that exceeds 6 will interrupt the structural integrity of the bonnet.

The dimensions in the drop-down list are external dimensions out of trim. The outer dimensions will be 1.5 more than the dimension in the drop-down menus due to the lining. For example, option 30x36 - the total outer width will be 31.5 wide. The interior dimensions are 1.5 less than the dimensions of the drop-down list.

For example, option 30x36 - the total inner width will be 28.5 wide. If you paint yourself: it is recommended to apply professional grade spray paint and dye.

If you order this unfinished product (gross or primed), you accept responsibility for the finished result. Each state/count will have its own codes. It is up to you to ensure that inspection codes are respected and that the size and location of your hood will meet your needs. We do not accept returns on hoods that are made exactly to order, so make sure you have ordered exactly what you want. If your hood has not been shipped and you want to change it to a completely different hood, we can accommodate you for a $200 restocking fee for the first hood.

These hoods are designed with an easy construction in 2 pieces that can be installed in 9 steps. See photos of the list for visuals of these instructions. Identify the centre point of the hood and the mounting height (mark a level line o will be the bottom of the hood). Locate and mark at least two studs for mounting.

Identify and mark the centre of the mounting package. Mark a level line of 12 above the desired mounting height.

Mount the package with screws of at least 2 1/2. Hang the hood apron to the tab, adjust the center and make sure you have a level positioning. Mount the package on a horizontal line in the stud(s). Attach the apron to the back using more screws (2 1/2 +). Set ventilation fittings before moving to step 9.

Apply adhesive, then install the chimney and attach with 21-gauge nails for positioning.